Solutions we offered:
- Bulker Unloading & Silo Loading Systems: Engineered dedicated unloading and conveying lines to fill storage silos directly from mobile bulkers for raw materials at a capacity of 15 to 20 TPH.
- Storage Silos:3 x 80 m3 Silos for bulk storage of materials. Designed Flow Assistance Technology for storage silos featuring:
- Silo Bin Activators to promote positive mass flow and prevent arching, rat-holing, or material bridging
- Bin Vent Filters mounted on top of each silo for dust-free air separation during loading operations
- Dense Phase Pressure Type Conveying Systems: Implemented reliable, low-velocity, dense-phase pressure pneumatic conveying lines for discharging materials from main storage silos and conveying them to downstream process day bins
- Day Bins: Provided three specialized day bins of 20 m³, 16 m³, and 15 m³ with Bin Vent Filters to capture fine particulates and maintain atmospheric venting during transfers.
- Pipeline Protection & Efficiency Boosters: Integrated Heavy Duty Wear Resistant Bends across all conveying lines (bulker loading and dense phase unloading lines) to mitigate line erosion from abrasive salts and minerals, along with Conveying Line Boosters to prevent line choking and maintain optimum air-to-material ratios over long distances.
- Sanitary & Corrosion-Resistant Piping: Deployed high-grade Stainless Steel Pipes throughout the silo loading and unloading conveying networks to prevent material contamination and resist chemical degradation
- Air Management & Automation Control:
- Installed a dedicated Air Management Station tailored for dense phase conveying to supply precise, regulated instrument air.
- Integrated system controls featuring a PLC-Based Control Panel (24V DC field instruments with SCADA connectivity) paired with an MCC-Based Panel (415V AC, 3-Phase, 50 Hz power distribution) to enable automated interlocking, sequencing, dynamic monitoring, and continuous, safe operation.
- Weighing & Batching Automation: Following the Day Bins, Indpro implemented dedicated weighing hoppers on load cells with dosing screw conveyors to accurately weigh and dispense measured quantities as per process requirement into the next step of detergent manufacturing.
Process Flow Diagrams
Experience the Indpro advantage!
Conclusion
Indpro successfully engineered and executed a high-capacity, turn-key pneumatic conveying system tailored for the demanding material handling needs of a modern detergent manufacturing plant. By deploying specialized dense-phase pneumatic systems, heavy-duty stainless-steel pipelines, wear-resistant bends, silos with active bin discharging mechanisms, day bins with dedicated weighing hoppers for each ingredient, the system reliably handles large volumes of fine, hygroscopic and abrasive materials like Light Soda, Sodium Sulphate, and PVD Salt.
The project demonstrates Indpro's ability to seamlessly bridge high-volume bulk intake with precision process-line feeding, maintaining strict dust control standards through dedicated bin vent filtration and automated PLC control architecture. The result delivers higher plant uptime, reduced maintenance overhead, dust-free plant hygiene, and precise, reliable raw material distribution across the entire manufacturing flow.
It will be our pleasure to help you.
Tell us more about your application needs.




